♥ Follow Me ♥
♥Free Fonts♥
Showing posts with label PTU TUTS. Show all posts
Showing posts with label PTU TUTS. Show all posts
Wednesday, March 7, 2018
SUPPLIES NEEDED
TUBE OF CHOICE: I used the beautiful artwork of
Fiodorova_Maria
This tube is called Ariana.
You must have a license to use this art.
You can find this tube and get your license HERE.
SCRAPKIT: Irish Blessings by Irish Princess Designs.
You can find it in these stores
FONT OF CHOICE: I used Exmouth.
I used Photoshop for this tut.
♥♥♥♥♥♥♥
Open a canvas 700x700 pixels.
Transparent background.
Use my tag as a guide for placement of elements.
I label my layers in the layer palette
with the element number from the kit I use
to cut down on confusion
while building my tag.
Open paper 2.
Center on canvas.
Hide this layer for now.
Open element 25.
Resize to 75%.
Place this a little toward the upper left.
We're going to place most of the elements
then place the tube.
I used these elements:
98, duplicate then hide the second layer
(we'll use the duplicate layer later)
143, resize to 10%, resize again to 65%
65 resize to 35%
51 resize to 35%, flip horizontally
90 resize to 50%
55 resize to 65%
11, resize to 90% then resize again to 25%
92 resize to 35%
34 resize to 25%
61 resize to 35%
36 resize to 35%
Now we'll place our tube
then add some more elements.
Go to the layer with element 98
in your layer palette.
Unhide the 98 duplicate layer.
Move this layer in between
element layers 90 & 55.
Now go back to the first 98 layer.
Highlight that.
Now open and place your tube.
It should be right above the
layer you just highlighted.
Resize your tube to fit.
I resized mine to 50%.
I also flipped my tube horizontally.
Erase any part of the tube that
hangs outside your tag.
Look at my tag for example.
Go up to your duplicated 98 layer.
Erase the part of the butterfly net
on the left side of the tag
that covers your tube's hand.
Now we'll add some more elements.
Go back down to your tube layer.
Highlight it.
The elements you add now will
be placed on top of your tube.
Open element 143.
Resize to 10%, resize again to 65%
Rotate it just a bit
and place it in your tubes hand.
Open 157.
Place this across the top portion of your tag.
Duplicate this layer.
Resize to 15%
Flip this layer horizontally.
Place it over the lips
and erase just a tiny bit
by the opening of the lips
to make it look like their blowing the rainbow.
Open element 57.
Resize to 10%.
Place on duplicated small rainbow.
Now highlight your paper 2 layer
at the bottom of your tag.
Unhide it.
Use a soft edged eraser
and erase around the edges
of your tag.
Place a dropshadow on all layers
EXCEPT
143 & 157, place an outerglow instead
No special effects on
paper 2 and
your duplicated 98 layer
Resize the siggy to your liking.
Make a new layer.
Type your name on the taggie.
I used color fefacf
Now duplicate your name layer
and hide the first layer.
Right click on the duplicated name layer.
Rasterize that layer.
With this layer still highlighted,
click on Filter at the top of your screen.
Next click Noise, then Add Noise.
In the pop up window,
use these settings:
Amount: 25
Check Uniform & Monochromatic
Click OK.
For the next effects,
Go to Layers at the top of your screen.
Click then click Layer Styles.
Now place a Stroke:
Size 3, Outside, Normal, Opacity 100%
color 13623c
I also used:
Bevel & Emboss
color 896308 for shadow mode
Add a drop shadow to your name.
MOST IMPORTANT!!
You must now do this:
Put the artist's name, website, and your license number
of the tube you used on the siggy!!
Add your name (ie: Designed by Your Name) behind this info.
Make sure this info is legible and clearly seen.
Always Save as PSD first.
Then you can save it as a PNG.
YOU'RE DONE!
I hope you had fun with this tut
and that you can use the different techniques
in other taggies you create!
♥ HUGS! ♥
*This tut was created by me, Redneck Tuts by Savage.
Any resemblance to any other is purely coincidental.*
Artist: ©Fiodorova_Maria www.picsfordesign.com PFD_Savage
Kit: Irish Belle by Irish Princess Designs
Monday, January 12, 2015
SUPPLIES NEEDED
TUBE OF CHOICE: I used a tube by Keith Garvey.
This tube is called Ivory.
There are three different sizes of this tube.
I used both Close Up sizes.
You must have a license to use this art.
You can find this art and get your license HERE.
SCRAPKIT: Sweet my Valentine by Edelweiss Design.
You can find it HERE.
MASK: Mask17 by Savage SWAK.
You can snag it HERE.
FONT OF CHOICE: I used Bickham Script Fancy Two.
I used Photoshop for this tut.
♥♥♥♥♥♥♥
In this tut we're going to make a quick tag using
a Cluster Frame and a mask as an overlay.
Open a canvas 800x800 pixels.
Transparent background.
Open papier08.
Center on canvas.
Open Cluster 03.
Center this on canvas.
Highlight papier08 layer.
Grab a soft edged eraser.
Erase the paper around the Cluster.
When you're done erasing,
the only paper that should be showing
will be inside the heart frames.
Now we'll work with the tubes.
Depending on the tube you use,
you may have different sizes.
With this tube, I used the two Close Ups.
Open the largest Close Up tube.
Place this under the Cluster frame in the Layer Palette.
Flip it Horizontally.
Duplicate this layer.
Position one layer inside the left heart frame.
Place the second tube layer inside the circle
next to the violin.
Use my tag as a guide.
Highlight the tube layer inside the heart.
Go to the top of the Layer Palette.
You will see a box with the word Normal.
Click the down arrow.
Scroll down and click Soft Light.
Now highlight the tube inside the circle.
In the upper right corner of the Layer Palette,
you will see Opacity.
Type 65 in the box.
Hit Enter on your keyboard.
Now open your mask.
Place the wordart layer of the mask
on top of your tube layers.
I rotated the mask a bit so the words slanted.
I put a Color Overlay on the mask.
I used this color:
9b0c18
Erase all parts of the mask
that go outside the heart frame.
This is now where I used a different size of the same tube.
Open your tube.
Place this on top of the mask in the Layer Palette
and under the Cluster Frame.
Position it to your liking inside the smaller heart frame.
Place a drop shadow on all your layers
except your paper and mask layers.
Resize the siggy to your liking.
Make a new layer.
Type your name on the taggie.
I used color 730b0d.
Now place a Stroke:
Stroke, Outside, 2, color White
I also used:
Bevel & Emboss
_html_3a686137.jpg)
Then I added an Outer Glow
And a Drop Shadow
_html_m394e1b14.jpg)
MOST IMPORTANT!!
You must now do this:
Put the artist's name, website, and your license number
of the tube you used on the siggy!!
Add your name (ie: Designed by Your Name) behind this info.
Make sure this info is legible and clearly seen.
Save as PNG.
YOU'RE DONE!!
(If you want to maintain your layers
Always Save as PSD first.
Then you can save it as a PNG.
I hope you had fun with this tut
and that you can use the different techniques
in other taggies you create!
HUGS!
*This tut was created by me, Redneck Tuts by Savage.
Any resemblance to any other is purely coincidental.*
Artist: ©Keith Garvey http://garvgraphx.com KG1195
Monday, January 5, 2015
SUPPLIES NEEDED
TUBE OF CHOICE: I used the beautiful artwork of
Alex Prihodko.
This tube is called
Evening by the Fireplace.
You must have a license to use this art.
SCRAPKIT: Simply Elegant by Mellie Beans.
You can find it HERE.
FONT OF CHOICE: I used Bickhem Script Two.
I used Photoshop for this tut.
♥♥♥♥♥♥♥
I didn't plan on writing a tut for this.
I was just playing around in PS,
but when I was done playing
and saw the finished thing...
Well, I couldn't help myself.
I had to write a tut. LOL!
So when you see “Reduce Size”
You will just need to play around a bit.
Normally, I resize elements to 35 or 25%,
sometimes I resize to 50%.
Have fun and Enjoy!
Open a canvas 1920 wide x 1200 high pixels.
Transparent background.
Open pp11.
Duplicate this layer two times.
Place layers next to each other
with sides touching and place at top of wallpaper.
In the Layer Palette,
Right click on the top pp11 layer.
Click Merge Visible.
Position this layer on your canvas
to your liking.
Some of it will be hanging off the sides of your canvas.
That's fine and it won't show in your finished wallpaper.
Now duplicate this layer and place it at the bottom
of your canvas so the top edge of it is touching
the bottom edge of the first pp11 layer.
When you have it the way you like,
Right click this layer in the Layer Palette
then click Merge Down.
You now have your background.
Please use any elements you like.
This wallpaper is only an example of what you can do.
I used these elements:
e14, I duplicated this once
e30
e44, I used this one six times.
Just duplicate the layer,
Reduce the size on a couple layers
and place randomly on your canvas.
e15, I duplicated this once.
e17, duplicate once and reduce second layer in size.
e46
e9, I used this element for the center of the canvas.
I also duplicated it twice, reducing the size
and using it for accents along the bottom of the canvas.
e12, I used this one four times,
Reducing only one layer.
e3
e13
e7, duplicate this layer and flip Horizontally.
Open your tube.
Place your tube below e13 layer.
Position as you like.
Duplicate the tube layer.
Highlight the second tube layer.
Flip it Horizontally.
Place this in the center of the canvas
so her face in centered inside the flower.
Grab a soft edged eraser.
Erase her body leaving only her face and arms visible.
In the Layer Palette,
Go to the upper right corner to Opacity.
Set that to 50%.
Place a drop shadow on all your layers.
I used this drop shadow for most of the layers:
_html_m3a25dadb.jpg)
Make a new layer.
We are going to put your name on it now
and give your text a slight curve.
Type your name on the wallpaper.
Look at the top tool bar.
Find the little square with T in it.
It should be right about in the center of the toolbar.
It will have a curved arrow under the letter T.
Click that.
A new window will pop up.
In the box next to the word Style,
you will see the word None.
Click the arrow in that box.
Now Click Flag.
Click the little dot by the word Horizontal.
Where it says Bend,
Type in 12.
Leave Horizontal and Vertical Distortion at zero.
Click OK.
_html_6ee4c23d.jpg)
Now for the text effects:
I used white for the lettering.
Stroke: 3, Outside, color: 6d6c6c
Bevel & Emboss
_html_m3d09e06b.jpg)
Outer Glow:
_html_m39f9ac.jpg)
Drop Shadow:
_html_51849557.jpg)
MOST IMPORTANT!!
You must now do this:
Put the artist's name, website, and your license number
of the tube you used on the wallpaper!!
Add your name (ie: Designed by Your Name) behind this info.
Make sure this info is legible and clearly seen.
Save as PNG.
YOU'RE DONE!!
(If you want to maintain your layers
Always Save as PSD first.
Then you can save it as a PNG.)
I hope you had fun with this tut
and that you can use the different techniques
in other things you create!
HUGS!
*This tut was created by me, Redneck Tuts by Savage.
Any resemblance to any other is purely coincidental.*
Artist: ©Alex Prihodko http://picsfordesign.com PFD_Savage
Saturday, October 19, 2013
SUPPLIES NEEDED
TUBE OF CHOICE: I used the beautiful poser by
RenderEricaWilmaSensibility.
This tube is called Devilin.
I used all three poses in the tag.
You can find them HERE.
SCRAPKIT: Nosferatu by Scrapz N Stuff.
You can find it HERE.
FONT OF CHOICE: I used Cocaine Sans.
I used Photoshop for this tut.
♥♥♥♥♥♥♥
Open a canvas 800x800 pixels.
Transparent background.
Use my tag as a guide for placement of elements.
Open pp4, center on canvas.
Open pp6, center.
Go to the upper left corner of your Layer Palette.
Click on the down arrow next to the word Normal.
In the drop down menu, click Luminosity.
Leave the Opacity set at 100%.
Open pp2, center.
Go to the drop down menu again.
Click Overlay.
Opacity set at 100%.
Now hide all three pp layers.
We will come back to them later.
Open fr3 and center on canvas.
Open fr2, resize to 90%
Center this over fr3.
Open pp3, center on canvas.
In the Layer Palette,
place this right below fr2.
Highlight fr2 layer.
Hold down the Ctrl key on your keyboard.
Now click the fr2 icon in your Layer Palette.
You should see marching ants on your tag.
Let go of the Ctrl key.
Highlight your paper layer.
Look at the bottom of your Layer Palette.
You'll see a little square with a circle in it.
Click that.
Your paper layer now has two icons in it.
Hide your fr2 layer.
With pp3 layer highlighted,
Right click in the layer palette.
Click on Convert to Sharp Object.
Right click again.
Click on Raterize Layer.
Now you have a red frame.
I erased a portion of this frame at the top
to make it look like it was wrapped around fr3.
Open el 14.
Place this behind fr3 and center.
Now let's play with some elements.
Open and place these elements:
el 2, resize to 80%
el 16, resize to 25%
el 10, resize to 20%
el 9, resize to 20%, flip Horizontally
el 1, resize to 65%
el 4, reseize to 75%
el 5
Now open up the poser Devilin1.
Place to your liking.
Go to the upper right corner of the Layer Palette.
Where it says Opacity,
type in 65%
Hit Enter on your keyboard.
Grab a soft eraser.
Erase all of Devilin1 except her head and shoulders.
Now we'll add more elements.
Open and place:
el 6
el 20, resize to 20%
el 18, resize to 35%
el 15
el 23
Open poser Devilin2.
Place to your liking.
Set the Opacity to 65%.
Erase her wings and legs.
Open poser Devilin3.
Resize her to 45%
Position her where you like.
Open and place:
el 7
el 8, resize to 65%
Now we'll finish up our paper layers.
Unhide all three paper layers.
Grab a soft edged eraser.
Erase around the paper edges
to prevent any harsh lines on your finished siggy.
This also give it a cloudy look.
Do this for all three papers.
Add a Drop Shadow to all layers
except the paper layers.
Resize the siggy to your liking.
Make a new layer.
Type your name on the taggie.
I used color 871320
Now place a Stroke:
Stroke, Outside, 2, Black
I also used a Drop Shadow.
MOST IMPORTANT!!
You must now do this:
Put the artist's name, website, and your license number
of the tube you used on the siggy!!
Add your name (ie: Designed by Your Name) behind this info.
Make sure this info is legible and clearly seen.
Always Save as PSD first.
Then you can save it as a PNG.
YOU'RE DONE!
I hope you had fun with this tut
and that you can use the different techniques
in other taggies you create!
HUGS!
*This tut was created by me, Redneck Tuts by Savage.
Any resemblance to any other is purely coincidental.*
Artist: ©RenderEricaWilmaSensibility
CT-SPU-Savage
Subscribe to:
Posts
(Atom)
About Me
- Savage
- Hi Ya'll! I'm Savage and I'd like to welcome you to Redneck Tuts. These are not your ordinary tuts, as they are geared toward those of us that don't have "working knowledge" of Photoshop or PSP. My tuts are all done in PS. They are designed to show you different techniques that you may not know. I hope you learn something that you can use in your creations in the future. Please, just have fun and put your own spin on these tuts. Be original and shine! Love Ya! ♥
